Free shipping to lower 48 states for orders over $50
-
Shopping Cart:
-
Your shopping cart is empty!
K&M PRECISION Controlled Depth Tapered Reamer
- Brand: K&M Precision
- Model Code: CDTR
- Availability: 10
Choose from all of our available Case Neck Chamfer Tools (Controlled Depth Tapered Reamers) here!
The K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even cut.
The tools cut chatterless by means of a 6-flute cutting design except for the .17cal-6mm tool which is a 3-flute tool. We now have 5 tools in the line up to accommodate calibers .17 through .50 caliber.
- .17cal – 6mm Calibers (.0585″ pin)
- 6mm – .338 Calibers (.0585″ pin)
- .35 – .408 Calibers (.074″ pin)
- .416 – .50 calibers (.074″ pin)
- .416 – .50 Calibers, BMG Cartridges base only (.134″ pin)
